Event Id 20073 Source Remote Access
Add the RRAS server to this group. The >machine is running windows 2000 server. We appreciate your feedback. The authentication server did not respond to >authentication requests in a timely fashion. >I've had the RAS server working just fine until I had to >relocate the machine and now it's this contact form
You can use the links in the Support area to determine whether any additional information might be available elsewhere. The RRAS server still authenticates client accounts that are local to the RRAS server, but it does not authenticate domain accounts. install toolkits? 7. Event ID 20073 — RAS Connection Updated: November 29, 2007Applies To: Windows Server 2008 A server running Routing and Remote Access provides two different types of remote access connectivity: virtual private https://technet.microsoft.com/en-us/library/cc733649(v=ws.10).aspx
In the Resolve DNS Name dialog box, click Resolve, and then select the IP address that you want to associate with that name from "Search Results."6. After plenty of retries, I finally succeeded. In this case, on the client computer running Windows Vista, change the authentication protocol configuration parameter from MSCHAPv1 to MSCHAPv2, and attempt to re-establish the connection. 0 Message Author Comment Select the members tab.
After the server rebooted clients could still dial-in but they where being rejected at the authentication stage. x 10 Eric W. Did the page load quickly? Join Now For immediate help use Live now!
See MSW2KDB for a list of possible causes. The passwords are very simple so no chance that they are wrong. This issue does not occur if you are logged in with an account that has administrator privileges in the Windows domain at the time you install and configure RRAS. http://www.eventid.net/display-eventid-20073-source-RemoteAccess-eventno-588-phase-1.htm No: The information was not helpful / Partially helpful.
In dial-up networking, a remote access client makes a nonpermanent, dial-up connection to a physical port on a remote access server by using the service of a telecommunications provider, such as Remote Access Error Code 20073 When a remote site is dialing in to the RAS server, the following error is received, "The following error occured in the Point to Point Protocol A VPN client uses special TCP/IP-based protocols called tunneling protocols to make a virtual call to a virtual port on a VPN server. Double-click the VPN connection, and then click Connect.
If anyone has a solution please post. http://kb.eventtracker.com/evtpass/evtPages/EventId_20073_RemoteAccess_51285.asp It's in regards to IAS but is the same principle for RAS. I continue to get 20187 and 20073. 0 Message Author Comment by:snyderkv ID: 336066692010-09-05 Ok I enabled verbose logging via Netsh. For example, Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) version 1 is not supported in the Windows Vista operating system.
We have yet to try it. weblink In RRAS, we get "listening" then "Authenticating" then nothing and we receive the same errors. If the client is a NAS and you plan to use NAS-specific remote access policies for configuration purposes, for example, a remote access policy that contains vendor-specific attributes, click Client Vendor, The remote computer does not support the required data encryption type." The remote system dialing in is a 3Com LANModem and connecting to a 3Com v.everything Courier modem on a Windows
Please reply Thanks Tom Quote:>-----Original Message----- >I'm getting event id 20073 on attempting to dial in >remotely to the server. Another link here explains the same issue and same error log in his IASSAM log http://arstechnica.com/civis/viewtopic.php?f=17&t=261473 I think it's important to note that the Dial in user is in another domain There is a potential mismatch in this case with authentication protocols in the client and server configuration parameters. http://itivityglobal.com/event-id/event-id-4015-event-source-dns-file-name-dns-exe.html Advanced Search Message The Server Watch Forum (forums only) will be closing.....
Source: RemoteAccess Event ID: 200187, 20073 and 20049 We are running 2003 Server with RAS. On top of changing the RRAS server Network Security NTLM level to match the domain, I also added key "Enable NTLMv2 Compatibility" key to the registry as the link states however, If you are experiencing a similar issue, please ask a related question Suggested Solutions Title # Comments Views Activity Problem with Active Directory 16 94 2016-07-28 Latest IE version for WIndows